______--Dungeon-Darkness to Light with a torch!--______




1. First make your dungeon (or whereaver you want your player to be in
darkness) and set the screen tone to about all 30's or all 40's. (if your
chara teleports there, include the screen tone trigger with that)
2. Then make JUST the bottom half of a torch. (The standing up kind) I
believe the torches are ONLY in the dungeon chipset, :-(    Now, look for
the pair of cracks, in the 2nd chipset thing. there should be 1 crack that
is 1 unit by 1 unit. Then there is one next to it that is 2x2 units. get the
1x1 and place that above the torch. (where the flame would go)
now, have an event in front of the torch. Have it activated by push key, and
no pic thing.
Your first event should be a sound effect, flame 1 at original speed is very
good. Then, set the screen tone at about all 90's or 100's. UN-CHECK THE
FEATURE FOR "wait until done" this is very important. Have it set for about
4 seconds. Now, in the 3rd tab (in the events) choose the "change
chip......." event. Have it upper chipset, and where the first pic is change
that to the crack thing you used, and where the second pic is, browse for
the 3 different types of (i'm not quite sure what they are, but they look
like flames) flames, choose the 1st flame, for the second pic. now, wait for
about .7 seconds, and add another flame sound effect (doesent matter which
one) then change the chipset again, pic 1 should now be the flame, and pic 2
should be the actual real torch flame!!!!! This about wraps it up, now, when
you play your demo:


It should be pretty dark, and when you activate your torch, it will spark
and light!!!!!!! then, everything will become light as if the torch was
giving off the light!

the end.


If you like, please submit it into your faq's, and please email me about the
adventure fighting faq.

[email protected]